WEG Outdoor 120 Volt Three-Phase NEMA Type 4X Enclosed Magnetic Starter (Requires 460 Volt Power Supply) HP/Motor Amps/Overload Amp Range: 7.5 HP/9.7 Amps/8.0-12.5 Amps

WEG Outdoor 120 Volt Three-Phase NEMA Type 4X Enclosed Magnetic Starter (Requires 460 Volt Power Supply) HP/Motor Amps/Overload Amp Range: 7.5 HP/9.7 Amps/8.0-12.5 Amps Reviews

Other Picture

A377-90 HP/Motor Amps/Overload Amp Range: 7.5 HP/9.7 Amps/8.0-12.5 Amps The WEG Enclosed Full Voltage Magnetic Motor Controls-Enclosed Starters are the most commonly used devices to switch AC motor loads. This ready to use device is available with NEMA Type 4X plastic enclosure for outdoor usage. The contactor is specifically engineered for extended mechanical and electrical life, providing dependable switching even in the most heavy-duty applications. The overload relay is fitted with fixed bimetallic elements, which eliminate any need for heating elements during installation or future upgrading to a different motor. Ambient temperature compensation as well as phase-failure and unbalance sensitivity provide motor protection. Same day shipping for phone orders placed before 2 pm EST Features: -NEMA Type 4X plastic enclosure for outdoor usage -Ambient temperature compensated overload relays -Step-down control circuit transformer -Selector switch for ''Manual-Off-Auto'' -''Start'' and ''Stop'' pushbuttons for manual operation -UL 508A Approved Specifications: -Three-phase starter -Horsepower: 0.5-15.0 (HP varies with model) -Power Supply Voltage: 460 -Coil Voltage: 120 -Motor Amps: 1.05-18.2 Amps (Motor Amps vary with model) -Overload Amp Range: 0.8-23 Amps (Overload Range varies with model

Visit Store Now !!

Detail Products

Detail Reviews

Mar 31, 2011 16:30:11

LAING UltraCirc 1/2" Pump with Timer and Cord

LAING UltraCirc 1/2" Pump with Timer and Cord Reviews

Other Picture

UltraCircPump with Timer - Sweat 1/2" inlet/outletFeatures: Integrated Check ValveIntegrated Ball Valve24 hour built-in timer to turn system off in periods of non-useQuick Release Screw RingLow flow provides minimal flow velocities thereby reducing the effect of pipe erosion and noise caused by vibration.Rated for temperatures to 230 degree F and line pressures to 150 PSIRequires only 33 watts of powerMaterial of Wetted Parts: Brass Housing316 Stainless Steel Rotor and Separating WallNoryl ImpellerCeramic Bearing BallCarbon Graphite Bearing CapEPDM O-RingPlease note: It is important that you read all included installation instructions before installing your pump

Visit Store Now !!

Detail Products

Detail Reviews

Mar 30, 2011 16:17:05

Simmons Mfg Co 2' Brz Foot Valve 457Sb Well Supply Accessories

Simmons Mfg Co 2' Brz Foot Valve 457Sb Well Supply Accessories Reviews

Other Picture

Simmons Mfg Co 2' Brz Foot Valve 457Sb Well Supply Accessories Feature

• Simmons #457SB 2" Bronze Foot Valve
• SIMMONS MFG CO

2' Silicon Bronze Lead Free Foot Valve, Silicon Bronze Cast Poppet, Stainless Steel Perforated Strainer, Female Pipe Thread.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 29, 2011 13:55:04

Little Giant 9S-SMPX-LG Pre-assembled Package w/ 20" x 30" Polythylene basin, 2 Piece Cover w/Bolt-O

Little Giant 9S-SMPX-LG Pre-assembled Package w/ 20" x 30" Polythylene basin, 2 Piece Cover w/Bolt-O Reviews

Other Picture

Little Giant 9S-SMPX-LG Pre-assembled Package w/ 20" x 30" Polythylene basin, 2 Piece Cover w/Bolt-O Feature

• Little Giant
• 9S-SMPX-LG
• Sewage Ejector Systems

Little Giant 9S-SMPX-LG Pre-assembled Package w/ 20" x 30" Polythylene basin, 2 Piece Cover w/Bolt-On Flanges - 9S 4/10 HP Sewage pump, 2" Discharge, 2" Ball/Check (509016)Pit Plus Bolt-On Flanges / Two-piece Structural Foam CoverFor collection of sewage, effluent, drainage and seepage water. Suitable for homes, farms, light commercial and industrial use. Pre-Assembled unit is provided completely assembled and ready to be installed.Little Giant 9S-SMPX-LG Pre-assembled Package w/ 20" x 30" Polythylene basin, 2 Piece Cover w/Bolt-On Flanges - 9S 4/10 HP Sewage pump, 2" Discharge, 2" Ball/Check (509016) Features: ; 4/10 HP Sewage ejector pump handles 2" solids; Automatic operation with dependable remote float switch; Large capacity (45 gallon) roto-molded polyethylene basin; Two-piece structural foam cover with 2" vent & discharge ; Molded anti-torque pump stops ; 360 degree molded handle for easy handling & instillation ; 4" Molded external inlet hub to accept flexible coupling; CVBV-2, 2" check valve/ball valve combinationLittle Giant 9S-SMPX-LG Pre-assembled Package w/ 20" x 30" Polythylene basin, 2 Piece Cover w/Bolt-On Flanges - 9S 4/10 HP Sewage pump, 2" Discharge, 2" Ball/Check (509016) Specification: ; Horsepower: 4/10; Flow: 80 GPM @ 5' of Head; Cord Lenght: 15' ; Shut Off: 18'; Voltage: 115; Hertz: 60; Amps: 13; Watts: 1020; Weight: 65

Visit Store Now !!

Detail Products

Detail Reviews

Mar 28, 2011 17:17:03

Pond Filter Kit with G325AG20

Pond Filter Kit with G325AG20 Reviews

Other Picture

Pond Filter Kit with G325AG20 Feature

• BF700A20
• For ponds up to 700 gallons
• Essential filtration for fish and plants
• Plastic bio-elements and polyester pre-filter

BEC7040310 Add a pump, fountain, and filter to your pond at once using the Professional Filter and Fountain Kit. This kit contains all you need to begin effectively filtering your pond water. Place the included 340 gallon per hour pump inside the filter box and surround it with the biological media balls. These media are covered in spokes of differing heights, offering several crevices for biological bacteria to establish a colony. The coarse and fine filter mats that cover the pump act as a macro filter, keeping debris from nearing your pump. The lid of the box has a fine screen to allow water in but prevent large debris from entering the unit. Features: -Pond filter with G325AG20. -Poly construction. -Ninety day limited warranty on filter box. -Cycles 340 gallons per hour. -Includes two fountain heads. -Dimensions: 21'' H x 5.5'' W x 5.5'' D.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 27, 2011 14:57:04

Super Series 2"-3" Water Pump with Three Phase 5.0 HP Electric Baldor Motor Elastomers: Buna-N, Port Size/GPM/Max Specific Gravity: 2"/160 GPM/1.39

Super Series 2"-3" Water Pump with Three Phase 5.0 HP Electric Baldor Motor Elastomers: Buna-N, Port Size/GPM/Max Specific Gravity: 2"/160 GPM/1.39 Reviews

Other Picture

SE2FB D5. OC Elastomers: Buna-N, Port Size/GPM/Max Specific Gravity: 2"/160 GPM/1.39 Image may vary from actual productThis pump is chemically resistant for general water service, waste treatment, salt water, and many industrial chemicals. It is molded from tough glass reinforced thermoplastics, to resist corrosion and chemical attack. Capable of delivering 160 to 280 gallons of water per minute (depending on model), this Super Series ''S'' Pump from Pacer Pumps is powered by a 3-Phase 5.0 HP/ 208-230-460 Volt TEFC Baldor motor. Call for Same Day Shipping for orders placed before 12:30 PM EST Features: -Choice of EPDM, Viton or Buna-N elastomers -316 stainless steel internal hardware -304 stainless steel fasteners -Double-flush volute to keep pump free of settled solids -Internal check valve -Self-priming -Carbon-ceramic mechanical shaft seal -Metal mounting base for motor Specifications: -Motor: 3-Phase Baldor TEFC (totally enclosed fan cooled) -Max Power: 5.0 HP/208-230-460 Volt/60 Hz @ 3,450 RPM -2'', 160 GPM, 1.39 has 115 ft. Max head, 49.7 psi -2'', 180 GPM, 1.61 has 85 ft. Max head, 36.8 psi -2'', 240 GPM, 1.0 has 75 ft. Max head, 32.5 psi -3'', 280 GPM -Weight: 120 lbs.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 26, 2011 16:11:32

Armstrong H-66-1PH BF In-Line Circulator Pump (116499-132)

Armstrong H-66-1PH BF In-Line Circulator Pump (116499-132) Reviews

Other Picture

Armstrong H-66-1PH BF In-Line Circulator Pump (116499-132) Feature

• Armstrong
• H-66-1PH BF
• In-Line Circulator Pumps

Armstrong H-66-1PH BF In-Line Circulator Pump (116499-132)Both S and H Series circulators feature the unique Armstrong shaft and bearing module for ease of serviceability and maximum interchangeability. Oversized shafts of alloy steel machined to exact tolerances. Impellers are constructed from non-ferrous material and are designed for optimal water delivery. Available in bronze-fitted and all-bronze construction.Armstrong H-66-1PH BF In-Line Circulator Pump (116499-132) Features:; Standard Three-Piece Design; Radially-Split Body; Oversized Shaft; Centrifugal Impeller; Positive Mechanical Seal; Modular ConstructionArmstrong H-66-1PH BF In-Line Circulator Pump (116499-132) Specifications:; BF = Bronze Fitted (Cast Iron) / General heating & circulating; Construction: o Volute - Cast Iron o Impeller - Cast Bronze o Shaft - Alloy Steel-Copper Sleeve o Mechanical Seal Assembly - Carbon Brass Trim - Ceramic Seat; Maximum Operating Temp. - 225;F (107;C); Maximum Working Pressure - 175 psi (1207 kPa); Pump and Motor Data: o Flange size (NPT) - 2 o HP - 3/4 o Volts & phase - 115/230 Volt 1 phase

Visit Store Now !!

Detail Products

Detail Reviews

Mar 24, 2011 21:19:04

4WEG Outdoor 208-240 Volt Single-Phase NEMA Type 4X Enclosed Magnetic Starter HP/Motor Amps/Overload Amp Range: 2.0 HP/11 Amps/10-15 Amps

4WEG Outdoor 208-240 Volt Single-Phase NEMA Type 4X Enclosed Magnetic Starter HP/Motor Amps/Overload Amp Range: 2.0 HP/11 Amps/10-15 Amps Reviews

Other Picture

A355-90 HP/Motor Amps/Overload Amp Range: 2.0 HP/11 Amps/10-15 Amps The WEG Enclosed Full Voltage Magnetic Motor Controls-Enclosed Starters are the most commonly used devices to switch AC motor loads. This ready to use device is available with NEMA Type 4X plastic enclosure for outdoor usage. The contactor is specifically engineered for extended mechanical and electrical life, providing dependable switching even in the most heavy-duty applications. The overload relay is fitted with fixed bimetallic elements, which eliminate any need for heating elements during installation or future upgrading to a different motor. Ambient temperature compensation as well as phase-failure and unbalance sensitivity provide motor protection. Same day shipping for phone orders placed before 2 pm EST Features: -NEMA Type 4X plastic enclosure for outdoor usage -Step-down control circuit transformer -Selector switch for ''Manual-Off-Auto'' -''Start'' and ''Stop'' pushbuttons for manual operation -Ambient temperature compensated overload relays -UL 508A Approved Specifications: -Single-phase starter -Horsepower: 0.5-10 (HP varies with model) -Power Supply Voltage: 230 -Coil Voltage: 208-240 -Motor Amps: 3.4-40 Amps (Motor Amps vary with model) -Overload Amp Range: 2.8-50 Amps (Overload Range varies with model

Visit Store Now !!

Detail Products

Detail Reviews

Mar 23, 2011 23:57:06

Little Giant 14EH-CIM, 1/2 HP, 60 GPM, 208-240V - Manual Submersible High Head Effluent Pump, 20' po

Little Giant 14EH-CIM, 1/2 HP, 60 GPM, 208-240V - Manual Submersible High Head Effluent Pump, 20' po Reviews

Other Picture

Little Giant 14EH-CIM, 1/2 HP, 60 GPM, 208-240V - Manual Submersible High Head Effluent Pump, 20' po Feature

• Little Giant
• 14EH-CIM
• Manual Effluent Pumps

Little Giant 14EH-CIM, 1/2 HP, 60 GPM, 208-240V - Manual Submersible High Head Effluent Pump, 20' power cord (514221)Eliminator High Head Series - Wastewater And Effluent PumpThe Eliminator Submersible High Head Effluent pumps are designed to handle 3/4" solids. Shut-off at 50', heavy-duty cast iron housing, volute and vortex impeller, thermal overload protection and 2" FNPT discharge.Little Giant 14EH-CIM, 1/2 HP, 60 GPM, 208-240V - Manual Submersible High Head Effluent Pump, 20' power cord (514221) Features:; Handle liquids with 3/4" solids.; Cast iron pump housing, impeller and volute with protective epoxy coating for corrosion and rust resistance.; Oil filled motor housing for lifetime mechanical seal and bearing lubrication and efficient heat dissipation.; Stainless steel screws, bolts, handle and seal assembly.; Mechanical-type seal (stainless steel spring, nitrile parts, carbon and ceramic faces) with secondary exclusion seal.; High speed (3450 RPM) 1/2 HP, ball bearing motor with thermal overload protection for high head operation.; Permanent split capacitor design.; Capacitor and power cord connections isolated from oil filled motor housing for ease of field maintenance.; Dynamically balanced two-vane vortex impeller with pump-out vanes to keep solids away from seal for less seal and bearing wear.; 2" Discharge Little Giant 14EH-CIM, 1/2 HP, 60 GPM, 208-240V - Manual Submersible High Head Effluent Pump, 20' power cord (514221) Specifications:; Flow 60 GPM @ 20' of Head; Cord Length 20'; Shut Off 50'; Voltage 208-240; Hertz 60; Amps 5.7; Watts 1275; Weight 81 lbs.; Height 16.2"; Width 9.9"; Length 14.1"

Visit Store Now !!

Detail Products

Detail Reviews

Mar 23, 2011 04:18:04

HS Residue Kit

HS Residue Kit Reviews

Other Picture

HS-RK The Tsurumi line of water pump accessories offers vital parts to your pumps in order to maintain their quality and performance. This Residue Kit available for the HS2.4S-62 allows pumping of residual water down to .4 inches!Increase the capabilities of your pump with this kit. Features: -Built specifically for the HS2 model to increase performance -Fits perfectly with the original unit -Easy to install Warranty Tsurumi's limited 2 year warranty. Warranty evaluations will be done within 2 days after receipt by Tsurumi's Authorized Repair Center.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 22, 2011 06:45:04

Little Giant 4-MD 690 GPH, 230V - Magnetic Drive Pump, 6' power cord (582012)

Little Giant 4-MD 690 GPH, 230V - Magnetic Drive Pump, 6' power cord (582012) Reviews

Other Picture

Little Giant 4-MD 690 GPH, 230V - Magnetic Drive Pump, 6' power cord (582012) Feature

• Little Giant
• 4-MD
• Magnetic Drive Pumps

Little Giant 4-MD 690 GPH, 230V - Magnetic Drive Pump, 6' power cord (582012)MD Series Model 4-MDMagnetically driven pump for mildly corrosive chemicals and solutions. The MD Series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use. Thermally protected open fan-cooled motor with ball bearings. 6 ft. power cord and 3-prong molded plug. (230V version has no plug).Little Giant 4-MD 690 GPH, 230V - Magnetic Drive Pump, 6' power cord (582012) Features: ; Specific Gravity - up to 1.1 ; Ambient Air Temperature - up to 77F (25C) ; Fluid Temperature ?â?Æ?é?ó?â?ó?ó?é¼?í?é?¼" Up to 150F (66C) Little Giant 4-MD 690 GPH, 230V - Magnetic Drive Pump, 6' power cord (582012) Specification: ; Horsepower: 1/12; Flow: 690 @ 1' of Head; Cord Length: 6' ; Shut Off: 23.7; Voltage: 230; Hertz: 60; Amps: ; Watts: 212; Weight: 8.5

Visit Store Now !!

Detail Products

Detail Reviews

Mar 21, 2011 11:32:28

Little Giant 9S-SMPX-B Simplex Package with Molded Polyethylene Basin and Bolt-On Flanges / Two-piec

Little Giant 9S-SMPX-B Simplex Package with Molded Polyethylene Basin and Bolt-On Flanges / Two-piec Reviews

Other Picture

Little Giant 9S-SMPX-B Simplex Package with Molded Polyethylene Basin and Bolt-On Flanges / Two-piec Feature

• Little Giant
• 9S-SMPX-B
• Sewage Ejector Systems

Little Giant 9S-SMPX-B Simplex Package with Molded Polyethylene Basin and Bolt-On Flanges / Two-piece Steel Cover. 2" Vent, 3" Discharge (509028)Simplex Package with Molded Polyethylene Basin and Bolt-On Flanges / Two-piece Steel CoverFor sewage, effluent, drainage and seepage water. Suitable for homes, farms, light commercial and industrial use. Packaged system is provided "unassembled" with all components packed inside the basinLittle Giant 9S-SMPX-B Simplex Package with Molded Polyethylene Basin and Bolt-On Flanges / Two-piece Steel Cover. 2" Vent, 3" Discharge (509028) Features: ; 4/10 HP Sewage ejector pump handles 2" solids; Remote float switch for dependable automatic operation; Roto-molded polyethylene basin; Two-piece steel cover with 2" vent & 3" discharge ; Cast iron caulking hub for 4" cast iron inlet pipe ; CV-SE3, 3" check valveLittle Giant 9S-SMPX-B Simplex Package with Molded Polyethylene Basin and Bolt-On Flanges / Two-piece Steel Cover. 2" Vent, 3" Discharge (509028) Specification: ; Horsepower: 4/10; Flow: 80 GPM @ 5' of Head; Cord Lenght: 15' ; Shut Off: 18'; Voltage: 115; Hertz: 60; Amps: 13; Watts: 1020; Weight: 61.7

Visit Store Now !!

Detail Products

Detail Reviews

Mar 20, 2011 16:28:06

Little Giant VCMA-15ULS Condensate Removal 1/50 HP Pump with Safety Switch

Little Giant VCMA-15ULS Condensate Removal 1/50 HP Pump with Safety Switch Reviews

Other Picture

Little Giant VCMA-15ULS Condensate Removal 1/50 HP Pump with Safety Switch Feature

• UL listed
• Safety switch included
• 1/50 HP motor
• 1/2 gallon ABS tank with stainless steel shaft
• 3/8-Inch OD barbed discharge and 6 foot power cord with thermal overload protection

The company that has always been the forerunner in condensate removal pump design, introduces the new generation VCMA Series. Adding features for every installation. Fully Automatic, new generation float arm for enhanced reliability. Suitable for high-efficiency, gas-furnace condensate. 3 drain holes with 20ft. shut off head and 8.7 PSI. Capable of drawing 50 GPH @ 5ft.. Intermittent Liquid Temp. up to 120deg F. Little Giant Pump Company once again defines state-of-the-art in pump design. UL and CSA listed. 1-year limited warranty. Flow (GPH): 65 GPH with a 1 ft. rise, Volts: 115, HP: 1/60, Max. Total Head (ft.): 15, Max. Suction Lift (ft.): 5, Discharge Port (in.): 3/8, Volute: Glass-filled Flame Retardant Polypropylene, Impeller Shaft: Glass-filled Flame Retardant Polypropylene, Power Cord (ft.): 6, Thermal Overload Protection: Yes

Visit Store Now !!

Detail Products

• Apex REM 15 15-Foot Connector Hose Remnants, Colors May Vary
• Little Giant CV-10 Check Valve
• Frigidaire Dehumidifier, 70-Pint Capacity, FAD704TDP
• Clear Vinyl Tubing, 3/8" ID x 1/2" OD x 100'
• Frigidaire 70-pint Dehumidifier

Detail Reviews

Mar 19, 2011 21:26:04